Mold can get started on wet building materials within a day or two. The EPA's guidance is to dry water-damaged areas and items within 24 to 48 hours to prevent mold growth. Dry everything inside that window and, in most cases, mold will not grow. Leave materials damp for longer and the risk keeps rising, even when the surface looks and feels dry.
What the 24 to 48 hour window really means
The clock starts when the material gets wet, not when you find it. A supply line that failed while you were at work has already used part of the window. A slow drip behind a dishwasher or under a tub may have used all of it weeks ago.
The window is also about drying, not mopping. Wiping up the puddle takes care of the water you can see. Carpet pad, the core of drywall, insulation and subfloor hold water long after the surface is dry to the touch.
You usually will not see anything at 48 hours. Growth starts small and often out of sight. Visible spots and a musty smell tend to show up later, and how much later depends on the material, the temperature and how wet it stays. The EPA's guide to mold and moisture in the home puts it simply: the key to mold control is moisture control.
What makes mold grow faster
- Porous materials. Drywall paper, carpet pad, insulation, wood and cardboard boxes soak up water and hold it.
- Closed spaces with still air. Wall cavities, the space under cabinets, the back of baseboards and crawlspaces dry slowly because air does not move through them.
- Dirty water. Water from a drain, a sewer backup or outdoor flooding brings contamination with it and needs a different cleanup than a clean supply line.
- Time. Every extra day that materials stay damp makes growth more likely and usually means more has to be removed.
Our climate adds to it. From October through spring the outdoor air here is cool and damp, so opening the windows does little to dry a wet room. A crawlspace can stay wet for weeks after heavy rain if nothing is done about it.
Where mold hides after a leak
Water follows gravity and soaks sideways into whatever it touches. After a leak, the places to worry about are usually the ones you cannot see:
- Inside wall cavities and behind baseboards.
- Under carpet and pad, and under vinyl or laminate flooring.
- Under and behind kitchen and bathroom cabinets.
- In ceiling drywall and the insulation above it. Our ceiling water damage guide covers that case.
- In crawlspace insulation and the subfloor above it. See our guide to water in a crawl space.
Touch is not a reliable test. Drywall can feel dry on the face while the back is still wet. Moisture meters are what show how far the water traveled and whether materials have dried.
What to do in the first two days
- Stop the water and make the area safe. Shut off the fixture or the main valve, and stay away from wet outlets, cords and appliances. Our guide on what to do when your house has water damage walks through the first steps.
- Remove standing water. Mop or wet-vacuum hard floors, lift wet rugs and move furniture off wet carpet.
- Get wet items out of the room. Cardboard boxes, cushions, rugs and piles of clothing hold moisture against the floor and walls.
- Move air and lower the humidity. Once the electricity is safe, keep the heat on and run fans and a dehumidifier. Do not point fans at anything that already looks moldy.
- Take photos before you throw anything away. Photos help if you file an insurance claim. Your insurer decides what is covered.
- Get the hidden areas checked. If water reached a wall, a floor, a ceiling or insulation, or ran for more than a few minutes, ask for a moisture check instead of trusting how it feels.
If you already see or smell mold
Fix the moisture first. Mold that is cleaned up while the leak or dampness continues tends to come back.
The EPA says that in most cases a homeowner can handle a moldy area smaller than about 10 square feet, roughly a 3 foot by 3 foot patch. Larger areas, or mold that follows a lot of water damage, are a job for someone with experience cleaning up mold. The same goes for anything caused by sewage or other contaminated water.
A few more points from the same guidance:
- Porous materials such as carpet and ceiling tiles may have to be thrown away once they are moldy.
- Do not paint or caulk over mold. Clean it up and dry the surface first.
- Do not run the heating or cooling system if you suspect mold inside it. It can spread mold through the house.
- If anyone in the home has health concerns, talk to a health professional. Our article on whether it is safe to stay in a house with water damage covers the questions to ask.
When to call Superior
Call us if water reached walls, flooring, insulation or a crawlspace and you are not sure it dried in time, or if you see growth or notice a musty smell after a leak. We answer 24/7 and serve the Portland metro and Vancouver and Clark County. We usually arrive within 45 minutes. Call to confirm the arrival time for your address. You can read more about our mold removal and water damage restoration work, or request a callback if it is not urgent.
