THE FULL STEP-BY-STEP GUIDE
What to do about soot, in order.
Wait until the home is cleared.
Do not enter a fire-damaged home unless the fire department says it is safe. The U.S. Fire Administration warns that floors and walls may not be as safe as they look.
Protect yourself and limit traffic.
Wear gloves, sturdy shoes and clothes you can wash separately. Keep children and pets out. Walk through sooty rooms as little as possible, and do not carry soot into clean rooms on your shoes.
Keep the air system and electronics off.
Leave the furnace and the heating and cooling fan off until the system has been checked, so soot is not moved through the ducts. Do not plug in or switch on appliances and electronics that were exposed.
Photograph before anything is touched.
Take wide shots and close-ups of each room, the ceilings and the belongings. Ready.gov says not to throw away damaged goods until you have made an inventory. Ask your insurer what it needs first.
Think about the age of the home.
If damaged ceiling texture, flooring, insulation or painted surfaces would have to be scraped, sanded or removed, stop. Those materials may contain asbestos or lead paint, and they need to be checked before they are disturbed.
Get the residue assessed.
Call Superior to look at the residue, the surfaces and the contents. Where water was used, moisture meters help map the wet materials. Drying readings do not establish that soot or contamination has been removed.
LOOK · DO NOT RUB
What kind of soot is it?
What burned decides what the residue is like and how it can be cleaned. Describe it from what you see. A rub test on an open wall can leave a mark that will not come out.
| Type of residue | What you may notice | What to do |
|---|---|---|
| Dry, powdery soot | Gray or black dust that sits on the surface and smears when rubbed. Often seen after paper or wood burned quickly. | Do not rub it. Photograph it. A hidden test spot shows whether a light wash will work. |
| Oily or sticky soot | A dark film that smears into streaks and clings to the surface. Often seen after plastics, rubber or grease burned, or after a slow, smoldering fire. | Leave it. Have the cleaning method matched to the residue and the surface. |
| Burnt food film | Little visible soot but a strong odor, with a thin yellowish or clear film on cabinets and walls after a cooking fire. | Check inside cabinets and in nearby rooms. Our kitchen fire guide covers this residue. |
| Soot on wet surfaces | Black streaks or stains where firefighting water ran down walls or soaked ceilings and floors. | Do not scrub. Report it promptly. The wet materials need a moisture assessment as well as cleaning. |
CLEARANCE · ASBESTOS · LEAD · UTILITIES
Check these before soot or damaged material is disturbed.
Washing a wall is one thing. Scraping, sanding or removing fire-damaged materials is another, and it has rules that differ between Washington and Oregon.
Re-entry and structure: follow the fire department.
Stay out until fire authorities say it is safe. The Red Cross warns that a sagging ceiling is wet, heavy and dangerous, and that a sagging floor could collapse under your weight. Keep everyone out from under a sagging ceiling and off a sagging floor.
Asbestos: inspect before materials are disturbed.
EPA says you cannot tell whether a material contains asbestos by looking at it. In Washington, L&I requires a good faith asbestos inspection of the materials a renovation, repair or removal project will disturb before work starts, unless they are treated as containing asbestos. The Southwest Clean Air Agency in southwest Washington also requires an asbestos inspection before a structure is renovated. In Oregon, DEQ says to have an inspector survey the home before renovation and to treat suspect materials as asbestos until samples are analyzed.
Lead paint: no dry scraping, sanding or sweeping.
EPA says a home built before 1978 is more likely to have lead-based paint, and that work that disturbs painted surfaces can create lead dust. Do not sand, scrape or dry sweep damaged paint.
Utilities and equipment: leave them off.
Do not reconnect electricity, gas or water yourself. Do not turn a tripped breaker back on: the Red Cross says it may indicate damaged wiring and to call an electrician. Keep the heating and cooling system off until it has been checked.
AFTER THE HOME IS CLEARED
When a careful wash is reasonable, and how to do it.
All of these conditions apply: the home is cleared for entry, the damage is photographed, your insurer has said what to keep, the surface is hard and washable, the residue is light, and no damaged material needs to be scraped, sanded or removed. If one of them is not met, do not clean it yourself.
Dress for it.
Wear rubber gloves, work clothes and sturdy shoes, as the Red Cross advises. Keep children and pets out of the room until it is finished and dry.
Test a hidden spot.
Choose a small area that will not show. Wash it with mild soap or detergent and warm water, rinse it and let it dry. If it smears, streaks or leaves a stain, stop. That residue needs a different method.
Work small, from the floor up.
The Red Cross method is to wash walls one small area at a time, working from the floor up to prevent streaking, and to rinse with clear water immediately. Wash ceilings last.
Dry everything, and wait to paint.
Dry washed surfaces thoroughly. The Red Cross says not to repaint until walls and ceilings are completely dry. Paint over soot or odor does not remove either.
Wash cookware, and set soft goods aside.
The Red Cross says pots, pans and flatware should be washed with soapy water and rinsed. Test-wash one garment before doing a load. Keep upholstered furniture, mattresses and valuable items aside and ask about cleaning before you discard them.
WHERE THE DAMAGE CAN SPREAD
Soot is rarely only where you first see it.
Smoke rises and drops its residue along the way. The U.S. Fire Administration warns that soot left after a fire may contain things that could make you sick, so treat it as more than dirt.
Ceilings and the tops of things
Look at ceilings, the upper walls and the tops of door frames, cabinets, shelves and light fixtures. Residue collects there and is easy to miss from the floor.
Rooms away from the fire
Check windows, closets and room corners in the rest of the home, and look at the vent covers. Rooms that the fire never reached can have residue on the walls.
Belongings and electronics
Soot settles on furniture, clothing, dishes and electronics. Do not plug in appliances or electronics that were exposed to heat, smoke or water until they have been checked.
Under the soot: wet or older materials
Where water was used, Superior uses moisture meters to help determine how far the water traveled and which materials are affected, instead of relying on touch. Possible water entry into a wall, floor or ceiling assembly warrants assessment without a visible stain. In an older home, damaged materials under the soot may contain asbestos or lead paint.
HOW SUPERIOR HELPS
Match the cleaning to the residue and the surface.
Tell Superior what burned, which rooms show soot and roughly when the home was built. Call once the fire department has cleared the property.
Assess residue, surfaces and materials
Look at each affected room and its contents, and identify the surfaces and materials needing attention. Ask whether any damaged material needs an asbestos inspection or lead precautions before it is disturbed.
Explain cleaning, removal and contents
Discuss the proposed cleaning methods, what may be recoverable and what requires further evaluation. Ask which belongings can be cleaned and who handles them.
Document and coordinate
Help document the damage and coordinate with your insurance provider. Your insurer decides what your policy covers. Where water was used, use moisture meters to help map wet materials and track drying.
KEEP THE FACTS TOGETHER
Record the soot before it is cleaned.
A cleaned wall shows nothing. Photograph first, and do not throw out damaged goods until they have been listed. Your policy and your insurer decide what is covered.
- The date of the fire, what burned and how to get the fire department’s report.
- Wide photos and close-ups of each affected room, including ceilings, vents and the insides of closets and cabinets.
- An inventory with photos of affected furniture, clothing, electronics and other belongings.
- Notes on anything already wiped, washed or thrown out, and receipts for what you spend because of the fire.
- The cleanup scope, any asbestos inspection report, and moisture-meter findings and drying records where water was used.
CLEAN · DRY · CONFIRM
Before the rooms are used and repainted.
- Confirm what was cleaned, what was removed and what was left for repair, room by room.
- Check ceilings, the tops of door frames and cabinets, closets and vents for residue that was missed.
- Have the heating and cooling system, and any exposed appliances and electronics, checked before use.
- Keep a copy of any asbestos inspection report and give it to every contractor who works on the repairs.
- Where water was used, ask for the moisture-meter findings before walls are closed or painted. Drying readings do not establish that soot or contamination has been removed.
AFTER THE CLEANUP
Prevent the next fire.
- Keep candles at least 12 inches from anything that can burn, or use flameless candles.
- Keep anything combustible at least three feet from portable heaters.
- Replace worn or damaged appliance cords. Do not run cords under rugs or furniture, and do not overload outlets.
- Have woodstove pipes and chimneys inspected and cleaned every year.
- Install smoke alarms on every level of the home, including the basement. Replace each unit every 10 years or as the manufacturer instructs.
QUESTIONS BEFORE YOU CALL
A few things you may be wondering.
Can I just wash the soot off?
Only when every one of these is true: the home is cleared for entry, the damage is photographed, your insurer has said what to keep, the surface is hard and washable, the residue is light, and a hidden test spot cleans without smearing. Otherwise leave it for an assessment.
Is soot dangerous?
Treat it with care. The U.S. Fire Administration says the soot and dirty water left after a fire may contain things that could make you sick, and tells people to be very careful when touching fire-damaged items. Wear gloves, keep children and pets away and wash your hands after contact.
Can I vacuum or sweep it up?
We recommend against it before an assessment. Brushing and sweeping rub dry soot into the surface and put fine dust into the air. In a home built before 1978, EPA also warns that settled lead dust can re-enter the air when a home is swept or vacuumed.
Why does asbestos matter after a fire?
Because fire cleanup often means removing damaged ceiling, wall or floor materials. EPA says you cannot tell whether a material contains asbestos by looking at it, and that damaged material may release fibers. Washington L&I requires an asbestos inspection of the materials a project will disturb before work begins. Oregon DEQ says to have an inspector survey the home before renovation.
Do soot stains mean the wall has to be replaced?
Not always. It depends on the residue, the surface and how deep the damage goes. Ask for a scope that explains the cleaning, removal and repair recommendations before work starts.
Sources and further detail
General safety and equipment references checked November 18, 2026. Follow the directions of your fire department, your utility companies and your insurer when they differ.
- U.S. Fire Administration: After the Fire booklet ↗
- Red Cross: cleaning up after a fire ↗
- Red Cross: checking your home after a fire ↗
- Ready.gov: home fires, including after a fire and prevention ↗
- EPA: protecting your family from asbestos in damaged materials ↗
- Washington L&I: asbestos inspection before materials are disturbed ↗
- Southwest Clean Air Agency: asbestos inspection before renovation ↗
- Oregon DEQ: asbestos information for homeowners ↗
- EPA: lead-based paint and lead dust in homes built before 1978 ↗
- EPA: using moisture meters to locate wet materials and monitor drying ↗

